Linda Sanders Unique Design Challenge

Unique Design Challenge  

Presented by Linda Sanders, Willunga, South Australia
YOU MUST BE ENROLLED IN LINDA SANDERS' CLASS EITHER SATURDAY OR SUNDAY (OR BOTH!) TO REQUEST A DESIGN CHALLENGE BANNER   
TYPE OF CLASS:  

Sew Project 

CLASS SIZE:
 
Class Size -  20

SKILL LEVEL: 

All Skill Levels


CLASS LENGTH: 

Time dependent on banner selected....either one or two days...if you want to complete your project under Linda Sanders tutelage, sign up for BOTH Saturday and Sunday.

TIMES OFFERED: 

Offered both Saturday and Sunday....enroll for one day (either Saturday or Sunday, or enroll for BOTH for a double helping of Linda!


SIZE OF PROJECT:

Project is full size--fits on a 16 foot banner pole (not included)

14.5 feet tall by 2.5 feet wide

(36.25 sq feet)

YOU MUST BE ENROLLED IN LINDA SANDERS' CLASS EITHER SATURDAY OR SUNDAY (OR BOTH!) TO REQUEST A DESIGN CHALLENGE BANNER   

FINAL decision for your design no later than 12/24/17 - please negotiate via email, EARLY!  


WIND RANGE: 

Project flys best in daylight, any wind
 



NOTE:

Bring a properly sized banner pole for our 
GROUP PHOTO! 


Linda Sanders' workshop will introduce you (or re-introduce you if you took her 2015 class) to her technique of inlaid appliqué.  You will be working with 200 denier banner nylon, a heavy weight color fast fabric with deep rich colors that last.  This fabric also boasts a special "Quiet" feature, allowing banners to be placed anywhere.    This technique involves no back-cutting, and no fraying.  Pre-cut fabric pieces will be assembled using the supplied paper pattern (reusable?) then hot-welded together with your own hot-dot-iron.  (A soldering iron, HOT, with a biro-style point.)  The stitch used for all the banner sewing will be zig-zag, 4mm / less than ¼” wide.

This class merges YOUR DESIGN IDEA with Linda Sander's design skills.  This project will be start with your photo(s) or design idea.  Linda will take your ideas and give you several options to implement your vision.  Once your design is approved, Linda will custom cut each piece and bring your custom banner for you to assemble under her tutelage.    

Allow ample time for design and decisions.

Pricing will be varied, but will be restricted by design level (to ensure visual success and time to complete in a weekend) to a maximum of $250 US.     
 

Supplies/Equipment Needed for class -- Sewing Machine, thread (BLACK), ripper, scissors, regular sewing supplies including a marking pencil which is visible on green fabric, and a cigarette lighter to seal threads.  Anyone with a light table may bring it, plus your own pole to fit (for group photo afterwards).  Also needed is a hot-dot-iron (a soldering iron with a point-style point) and an extension cord.  Several sheets of thick cardstock or poster board and clear packing tape to join them will aid you in having a smooth surface to hot weld on.  




YOU MUST BE ENROLLED IN LINDA SANDERS' CLASS EITHER SATURDAY OR SUNDAY (OR BOTH!) TO REQUEST A DESIGN CHALLENGE BANNER   

FINAL decision for your design no later than 12/24/17 - please negotiate via email, with Linda, EARLY!